Computerized Wire Cutting Machine

Computer wire cutting machine

Fully automatic terminal machine is a more convenient machine, we should also know this, fully automatic mechanical equipment Those with greater help can save a lot of labor and increase the output of the factory. It can also help the factory to temporarily relieve the problem of not being able to find workers. However, we are also using the fully automatic terminal machine when we use it. There will be a problem. Some time-division automatic terminal machines will have relatively loud noises after being used for a period of time. We should all be aware of this! So what are the specific reasons for the formation?

The computer stripping and tapping machine is a semi-automatic model. As the name suggests, it has the functions of automatic peeling and crimping of the terminals, but it requires manual feeding and manual control of the foot power switch to work. The production efficiency is high and the price is low. Ultra-quiet terminal machine The computer terminal machine with the servo (inverter) is a semi-automatic model, which requires manual feeding and manual control of the foot pedal power switch to work. The working principle is similar to the stripping terminal machine, but it does not have the automatic thinning function (usually used in conjunction with the computer wire cutting machine), low energy consumption and low price.

Generally, it is normal to have fine noise. If it is a loud one, then there are these two problems, a. There is abrasion between certain parts and components of the terminal machine, which leads to increased conflicts; b. The screw of the terminal machine is loose during work, causing the parts to vibrate and become rugged.

Computer wire cutting machine terminal refers to a machine used for wire processing. It can press five metal heads to the end of the wire and then conduct. The terminal printed by the terminal is usually for convenient connection. No welding is required, and the two wires can be connected together stably, and only need to be pulled out when disassembling. Dongguan Great Wheel Machinery Co., Ltd. has production terminal machines, you can refer to their information. When we are processing the wires, it is very troublesome if we rely on manual work. After the terminal machine is disconnected from the power supply, if the rotation has not stopped, people are not allowed at this time, so someone invented something that can help us to process the wires. Machine, terminal machine is one of them.

For such problems, what we have to do is to find a solution. If we want to prevent the terminal machine from being disturbed by noise, we must first choose a reasonable tool and improve its installation accuracy. ; At the same time, we must improve the cutting process of the terminal machine. If it is a slender workpiece, try to choose ninety degrees for cutting. In this way, the noise problem of the terminal machine should be alleviated.

Computer wire cutting machine

You do it more, I think you will be familiar with this one, if you still don’t understand it during the operation, please call: 0769-87883409, Dongguan Julun Machinery Co., Ltd. The company, we are a professional terminal machine, computer stripping machine manufacturer, we will definitely let you understand the terminal machine debugging method; how many square lines should be used and how many tonnage computer terminal machines. Terminal machines can be classified as fully automatic terminal machines, connecting Stripping terminal machine, ultra-quiet terminal machine, pneumatic terminal machine, terminal machine, computer Wire automatic stripping machine, pin terminal machine, gold wire terminal machine, etc.

The daily maintenance precautions of the automatic terminal machine have been introduced here. You can learn more about it, and we should pay more attention to it when we use it. This is for us There is better assistance. Be careful when using the automatic terminal machine. If you need to buy automatic terminal machines, automatic pipe cutting machines, corrugated pipe cutting machines and other mechanical equipment, you can call Contact us, and we also have punctured terminals, terminal molds, terminal copper strips and other accessories, please contact us if you have any needs

Computer wire cutting machine

Computer wire cutting machine, automatic terminal machine, semi-automatic terminal machine working principle, diagrammatically put the qualified terminal on the terminal frame as required, and install the terminal chain head in the correct way Inside the equipment. Confirm that the die of the equipment matches the installed terminals, and then adjust the pressure of the stripping terminal machine and other parameters, and adjust the corresponding position of the terminal chain and the equipment. Take the stripped wire and check for defects, then align the wire with the slot of the terminal machine and the terminal opening, adjust the position, and then step on the foot pedal with your foot to put the terminal on the wire.

It is necessary to add butter to the crimping part of the automatic terminal machine every week, and apply it evenly on the surface of the high-speed bearing and around the pressure block

The computer wire cutting machine is conductive, so the key point is that too tight will break the copper wire or directly break the blade. If it is loose, it will cause the terminal to contact This part of the wire is easy to fall off. You can do it more. I think you will be familiar with this one. If you have done the operation and there is still something you don’t understand, you can call: 0769-87883409 Dongguan Julun Machinery Co., Ltd. We are a professional computer terminal machine , The wire stripping machine manufacturer, will definitely let you understand the debugging method of the terminal machine

Computer wire cutting machine

Computer wire cutting machine

The computer stripping and tapping machine is a semi-automatic model. As the name suggests, it has the functions of automatic peeling and crimping of the terminals, but it requires manual feeding and manual control of the foot power switch to work. The production efficiency is high and the price is low. Ultra-quiet terminal machineThe computer terminal machine with the server (inverter) is a semi-automatic type. Manual feeding is required, and the pedal power switch can be manually controlled to work. The working principle is similar to the stripping terminal machine, but it does not have the automatic thinning function (usually used in conjunction with the computer wire cutting machine), low energy consumption and low price.